🌟Struggling to Get That Perfect Low-Angle Shot?
This model makes it effortless to capture extreme upward facial perspectives at low angles. Whether you’re training a LoRA or building a 3D model, this tool is the perfect solution.

🎯 How to Use:
1️⃣ Choose any subject photo shot from a horizontal or slightly above-horizontal perspective.
2️⃣ Load both the high-noise and low-noise models into your image-to-video workflow. (I tested high-noise strength between 0.75–1.0, which runs stably; low-noise works well around 0.5.)
3️⃣ Input the trigger word “(弧降仰底)” — a cinematic low-angle crane-like motion.
4️⃣ For more control, try prompt templates like these (replace the subject as needed):

“The camera starts moving forward from eye level, then tilts down vertically, shifting the perspective into a full low-angle shot. Finally, it approaches the ground, capturing a full-body close-up of the man from below.”

“The camera starts at eye level, then tilts vertically downward, moving the perspective into a complete low-angle view. At the end, it closes in on the chin, finishing with a dramatic low-angle facial close-up.”

💡 You can also write your own prompts following this motion concept — most of the time, they’ll produce excellent results.

🌟 还在为获取刁钻的低角度仰视镜头而发愁吗？
这个模型可以轻松捕捉人物极限仰视角度的面部素材。如果你有 LoRA 训练 或 3D 模型构建的需求，它将是再合适不过的选择。

🎯 使用方法：
1️⃣ 选择任意主体的水平或高于水平视角的照片。
2️⃣ 在图生视频 workflow 中加载 高噪模型 和 低噪模型（我测试过，高噪强度 0.75–1.0 稳定运行；低噪在 0.5 左右即可）。
3️⃣ 输入触发词 “(弧降仰底)” —— 一种类似升降机位的仰视运镜效果。
4️⃣ 为了更好地定向输出效果，可以参考以下提示词模板（可替换主语）：

“镜头从视平线向前推进，然后垂直向下倾斜，逐渐转变为仰视全景，最终贴近地面，从下往上捕捉男人的全身特写。”

“镜头从视平线开始，逐渐垂直下倾，从正面转换为完整的仰视视角，最后贴近下巴，以仰视角度收尾，呈现面部特写。”

💡 当然，你也可以自己编写符合这一运镜概念的提示词